Lorex Auto Port Forwarding Software For Mac

Posted on
Ddns
  1. Lorex Port Forwarding Setup
  2. Lorex Ddns Port Forwarding
  3. Lorex Auto Port Forwarding Wizard
  4. Lorex Auto Port Forwarding Software For Mac Windows 10

Thank you for using our software library. Use the link given below and proceed to the developer's website in order to download Lorex mCam free. We wish to warn you that since Lorex mCam files are downloaded from an external source, FDM Lib bears no responsibility for the safety of such downloads. Thank you for using our software library. Use the link given below and proceed to the developer's website in order to download Lorex mCam free. We wish to warn you that since Lorex mCam files are downloaded from an external source, FDM Lib bears no responsibility for the safety of such downloads. Lorex Auto Port Forwarding (Lorexapf.exe). Lorex Easy Connect is a software application that allows you to view your security device over the Internet quickly and easily. You can view live video from your security cameras from any PC, Mac, or smart phone from anywhere in the world! Thank you for using our software portal. Use the link below and download Lorex Auto Port Forwarding legally from the developer's site. However, we must warn you that downloading Lorex Auto Port Forwarding from an external source releases FDM Lib from any responsibility. Lorex Auto Port Forwarding. Lorex Easy Connect is a software application that allows you to view your security device over the Internet quickly and easily. The port forwarding on the router is configured to forward port 7001 to the second IP camera at address 192.168.0.102 on port 7000. You see that the external Internet port does not need to match the internal LAN port that you setup forwarding to on your router.

An important aspect of having a ZTE router on your home network is internet security. In general, routers block incoming internet connections and protect your network by only allowing the connections that you specifically set up. Sometimes it is necessary to unblock certain connections in your router or open a port in order to play a game or use an application. To help you get a better connection for gaming or using an application, you can open a port in your F670 and allow a direct connection.

The following steps will show you how to open ports on the ZTE F670 router:

  1. On the computer or device that you are forwarding ports to, you will need to set up a static IP address.
  2. Login to your ZTE F670 router.
  3. Make your way to the Port Forwarding section of the ZTE F670 router.
    • Find the Application tab located near the left of the screen and click on it.
    • Click the Port Forwarding link.
  4. Go ahead and create a Port Forwarding entry.

If the process of forwarding ports in your router seems difficult to you, you are not alone! Do not get discouraged. Let us walk you through the steps for opening a port in the ZTE F670 router. Just follow along as we lead you through the process of opening a port in your router.


We think that forwarding a port should be easy. That's why we created Network Utilities.Our software does everything that you need to forward a port.

When you use Network Utilities you get your port forwarded right now!

Step 1 - Setup A Static IP Address

It is important to setup a static IP address in the device that you are forwarding a port to. This ensures that your ports will remain open even after your device reboots.

  • Recommended - Our free program will setup a static IP address for you.

    → Download Network Utilities today!

  • Or follow our Static IP Address guides to setup a static IP address.

After setting up a static ip address on your devices you need to login to your router.

Step 2 - Login To Your ZTE Router

Log in to your ZTE F670 router. To log in you will need to use a web browser since the ZTE F670 uses a web interface to access router configurations.

Open up whichever internet browser that you are comfortable with. If you are not sure which one to use, then go ahead and open Chrome, Firefox, or Internet Explorer.

To help with confusion, we have simplified this step for you with this link: Login to your F670 Router

Once you have opened a web browser, find the address bar which is usually located at the top of the screen. The image below shows an example of this.


Look at the screenshot above and find 192.168.1.1 in the address bar. This is your router's IP address (which is sometimes called the computer's default gateway.)

The ZTE F670 router's default IP address is: 192.168.1.1

After typing your router's IP address into the address bar, make sure to click the enter button on your keyboard. You should see a box similar to the one shown below.

Go ahead and enter the username and password for the ZTE F670 router in the spaces available. Remember if you have changed them in the past, you need to enter those values.

  • The default ZTE F670 Router Username is: admin
  • The default ZTE F670 Router Password is: admin

Enter your username and password, and then click the Login button to log in to your ZTE F670 router.

ZTE Usernames and Passwords

Lorex Auto Port Forwarding Software For Mac

If the username or password did not work check out our Default ZTE Router Passwords page.

If you are unable to log in even after trying the above list of passwords you may need to consider a reset for your router. Our guide How to Reset a Router can help you with that. After resetting the ZTE F670 router your username and password will be reverted back to factory defaults.

Step 3 - Find The Port Forwarding Section

After successfully logging in to your ZTE F670 router you should see the router's home page on your screen. Find the Port Forwarding section of your router.

Lorex Port Forwarding Setup

  • Click on the Application tab, which can be found at the left of the screen.
  • Click on the Port Forwarding link.

You should now be on a page that says Port Forwarding.

Step 4 - Create A Port Forward Entry

Make sure that it is necessary for you to open a port in your router before doing so, since this will allow data to come through the firewall portion of your router to a specific device. It is possible that this could lead to malicious traffic on your network. However, don't let this warning stop you from making this change if you need it because the risk is very low.

Here are the ports to forward for Xbox Live:

TCP Ports:3074
UDP Ports:3074

If you are looking for the ports for a different application you can find it by either:

  • Browsing our List of Games
  • Check out our our List of Games by Genre
  • See our List of all Applications
  1. Check Enable.
  2. Type in a name for this forward in the Name box. Choose a name that will help you remember why this forward was set up since it does not effect the functionality of the forward.
  3. Use the Protocol dropdown box to select the protocol type of the ports you are forwarding. If your router has the option of Both then choose that. Otherwise select either TCP or UDP as needed. If you need to forward a port for both TCP and UDP and your router does not have Both then you have to create two entries.
  4. Leave WAN Host Start IP Address blank.
  5. Leave WAN Host End IP Address blank.
  6. Choose your internet connection from the WAN Connection dropdown box.
  7. Enter the port number into the WAN Start Port and the WAN End Port boxes to forward a single port. If you are forwarding a range of ports, enter the lowest number of that range into the WAN Start Port box and then enter the highest number of that range into the WAN End Port box.
  8. Remove the checkmark from the Enable MAC Mapping box.
  9. You need to enter the IP address that you are forwarding ports to into the LAN Host IP Address box. It's possible for this to be either the IP address of your computer or any other IP address on your network that you want ports forwarded to.
  10. Enter the same values into the LAN Host Start Port box that you entered into the WAN Host Start Port box.
  11. Take the same values that you entered into the WAN Host End Port box, and enter them into the LAN Host End Port box.
  12. When you are completely finished, click the Add button at the bottom of the page to apply these changes.

Test Your Open Ports

Finally, test your network to see if you have forwarded ports in the ZTE F670 router correctly. To do this you can use Network Utilities, which includes a free Open Port Checker tool. Open Port Checker is the only online port-checking tool that has Guaranteed Results.

Check Out These Helpful Guides:

  • Our software called Network Utilities does all of this and more.
  • Find detailed tips on how to Setup your router.
  • A great list of games and applications that require port forwarding along with their related port numbers.

Most users of IP cameras (network security cameras) want to access their camera remotely to see live video. Accessing cameras remotely from desktop software (Mac and Windows) and mobile apps (iPhone and Android) is extremely common for home owners and business owners.

The most common way to enable remote viewing to IP cameras is by manually setting up port forwarding on the network router that the camera is connected to. UPnP (universal plug-and-play) is a newer method that is supported by some routers and cameras but is not as reliable in my experience. This article explains ports forwarding and dynamic DNS – two concepts to understand if you want to access security cameras remotely. Setting up port forwarding for multiple IP cameras is also covered.

Please note that although this article focuses on IP cameras, the process and concepts are the same for network video recorders and security camera DVRs.

Here is and explanation of how it works using the above network diagram to explain.

Network Diagram / Wiring Installation Explanation

  1. All of the devices on the right of the red line are on the local network where the camera is located.
  2. The laptop on the left of the red firewall is at a different location than the IP camera and not connected to the same network. The laptop on the left can be located anywhere in the world as long as it is connected to the Internet.
  3. The red line in the middle represents the firewall that separates the local network from Internet.
  4. The IP camera in the upper right is hard wired to a network router using CAT5 Ethernet cable.
  5. The laptop on the right is also hard wired to the same router.
  6. The network router is hard wired to the Internet modem using CAT5 Ethernet cable. This modem can be a cable, DSL, direct fiber, or any other type of high speed Internet modem.

Connect to Camera on LAN

Before you setup port forwarding for remote access, you should first connect to your cameras on the LAN (local area network).

  1. Our IP camera is running on port 7000. Please note that different IP camera manufacturers use different default ports. Check your manual to confirm the port that your camera uses. Please note that you can change your camera’s port when you login to it.
  2. Typically, when you connect an IP camera to a router and power it on, the camera is assigned an IP address by the router. This is known as DHCP (Dynamic Host Configuration Protocol). Our IP camera was assigned IP address 192.168.0.101. Most IP camera manufacturers have their cameras setup to use DHCP by default, but some have a static IP address assigned to their cameras. You need to check your camera’s manual to confirm. If you are unsure, plug your camera into your router and power it on. Most IP cameras include PC software to search your network for IP cameras. If yours does, run this software to locate the IP address of your camera and make note of it.
  3. Using a computer on the same network as your IP camera, login to your IP camera. IN our example, we are using a laptop on the local network with IP address 192.168.0.2. Most IP cameras have an interface that can be accessed via web browser. In our example, would enter the following address into the web browser of the laptop on the right. https://192.168.0.101:7000. If the address and port is correct, you will most likely be prompt for a user ID and password by your camera.
  4. Enter the default ID and password and you should see a live view of your camera or a configuration screen. Congratulations, you just accessed your camera on the LAN.

IP Reservation

After confirming that you can access the IP camera on the LAN (local area network), you should reserve that IP address specifically for your IP camera. By reserving an IP for your camera, if your router looses power or needs to be re-booted, that same IP will always be assigned. This is important because your port forwarding rule that you will setup will not work if the IP address of the camera changes. Consult with your router’s manual on how to setup IP reservations for your specific model.

Port Forwarding Setup / Network Setup

Lorex Ddns Port Forwarding

Port forwarding is what enables you to access your camera remotely over the Internet. In the above diagram, the red line represents the firewall provided by the router. Basically, no outside traffic is allowed into your network. When you setup a port forwarding rule, you create a controlled hole in your firewall.

To set port forwarding, login to your router and navigate to the port forwarding section of the interface. This will vary by make and model. You should consult your manual or search online for instructions.

In our example, we forward incoming requests on port 7000 to IP address 192.168.0.101 on port 7000. This allows access to your network, through your network firewall, (only on port 7000) and forwards all of those requests to your IP camera.

Test Remote Access

To confirm that port forwarding is setup properly, you must try to connect from a device that is not on the same network as your camera. If you are on-site where the camera is located, you can turn off the WIFI connection of your phone so that you connect over the cellular phone network.

  1. 207.5.23.205 is the IP address of the Internet connection in the above example. You can find out what your Internet IP address is by using accessing this page from any computer or mobile device on the network where your camera is located: What is my IP Address?
  2. If you have trouble accessing your camera, us this open port forwarding test tool to see if the port is properly open.

DDNS Setup for Dynamic IP Addresses

Contact your Internet service provider and ask them if your Internet connection has a static or dynamic IP address. If you are fortunate enough to have a static IP address, you can always access your camera remotely using the IP address of the Internet connection (207.5.23.205 in our example) where your camera is installed. If your Internet IP address is dynamic, you should setup a DDNS service to manage changes in your IP address.

DDNS Account Setup

  1. Create an account with a DDNS service provider. DynDNS and No-IP are two of the biggest service providers out there. At the time of this writing, DynDNS cost $40 per year and No-IP has a free account that requires that you login through a web browser once a month to keep it active. Some IP camera manufacturers provide their own DDNS service for free.
  2. After you setup an account with the DDNS provider of your choice, a connection to the service must be made from your IP camera, a PC on the same network, or in your router. Where you do this depends on which of your devices support the DDNS update service.
  3. When you setup your account, you will choose a hostname to use. For example, my-ip-camera.ddns.org. After DDNS is setup, you will use this hostname instead of your IP address to access your IP camera remotely.
  4. You can see these instructions on how to setup DDNS for Zavio IP cameras. Please note that not all IP cameras have this built-in. If yours does not, check to see if your router supports it or your last option is to install a DDNS client on a PC. Please note that if you choose the PC option, that PC must always be running.

How DDNS works

Here is how DDNS service works.

  1. There is a service running on your IP camera (or network router or PC if you chose those options) that monitors the IP address of your Internet connection.
  2. When the service detects a change, it contacts the DDNS provider and updates them with the new IP address.
  3. The DDNS provider updates the record for your hostname with the new IP address.

The result is that whenever you access your camera remotely using the DDNS hostname (my-ip-camera.ddns.org is my example), the request is always routed to the correct IP address.

Port Forwarding Multiple IP Cameras

Suppose you want to enable remote access for more than one IP camera. The IP cameras are the same brand, maybe even the same model – so they use the same port. This is how you can setup port forwarding for multiple IP cameras running on the same port.

Here is the same diagram that was used in the first explanation except a second IP camera was added to the network. Everything is setup the same way with the following additions and notes.

  1. The second IP camera is assigned LAN IP address 192.168.0.102.
  2. The second IP camera uses the same port as the first one, 7000.
  3. The port forwarding on the router is configured to forward port 7001 to the second IP camera at address 192.168.0.102 on port 7000.

You see that the external Internet port does not need to match the internal LAN port that you setup forwarding to on your router.

Alternatively, you could change the port that the second IP camera uses in the IP camera’s settings. For example, you could switch the second IP camera to use port 7001 instead of 7000. I have personally found that it is easier to manage if you keep all of you IP cameras on their default ports and setup unique forwarding ports, as described in the above digram.

Lorex Auto Port Forwarding Wizard

What is Port Forwarding?

Lorex Auto Port Forwarding Software For Mac Windows 10

/blackberry-blend-for-mac-os-sierra.html. If you would like further explanation of port forwarding, please watch this video.